վͼ

Guangxi Nanning CraftsmanElectromechanical
Equipment Co., Ltd


Create a quality brand of industrial equipment
0771-3859239
 Welcome new and old customers to visit us. 

about us

GXCRAFTSMAN Guangxi Nanning Craftsman Electromechanical Equipment Co., Ltd. is a high-tech enterprise specializing in sales, R&D, design and installation of industrial control equipment. It provides customers with powerful and comprehensive capabilities, advanced equipment and scientific production management and technology. Quality products and dedicated service.

Applications

Applications

/  APPLICATIONS

ϵͳ0.png


Elevator system overall solution?


The elevator control system is a very complicated system involving control technology, motor drive technology, network technology, wireless communication technology, etc



EC100.jpg


Application of elevator intelligent whole machine in elevator?


Due to the continuous advancement of human civilization, building construction began to appear in our lives in large numbers



˿.jpg


?G500 inverter in the mixer application case


Abstract: This paper introduces the application of craftsman G500 series inverter on wire drawing machine. As the main



Ӣģ.jpg?


Oman 100KW+50KW photovoltaic pump power supply system


Oman 100KW + 50KW photovoltaic pump power supply system, our technical engineers are dispatched to the project site in Oman




TECHNICAL SOLUTIONS

TECHNICAL SOLUTIONS

/  /  TECHNICAL SOLUTIONS

2016-10-25

How to distinguish between heavy faults and light faults

When a light fault occurs, the system issues an alarm signal and the fault indicator flashes. When a heavy fault occurs, the system issues a fault indication and the fault indicator is always on. At the same time, the command is issued to break the high voltage and close the switch, and the fault information and the high voltage breaking command are memorized.


2016-08-11

Monitor black screen

Press the system reset button on the door (system reset will not affect the normal running state of the inverter); if it still can't recover, check if the power terminal of the monitor is off, the cable is loose, 5V and 15V power supply is normal, monitoring Is there any obvious damage to the circuit?


ABUIABACGAAgwqWx6AUo_v-W4QEwtAM4rAI

The inverter is tripped when it is powered on
When the inverter is powered on, due to the inrush current of the transformer and the charging of the unit capacitor, the instantaneous current effective value can reach 6-7 times of the rated current of the inverter, and the duration is several tens of milliseconds; if the setting of the current protection of the inverter is too small, Will cause the upper switch to trip protection trip.

ABUIABACGAAg9oqx6AUo1Z6zKTC0AzisAg

The motor does not turn after the inverter is running.

Check whether the inverter output has contactor or switch type equipment; check whether the inverter output is connected to the motor once; observe whether the monitor has output current and output voltage. If there is voltage or no current, the main circuit of the inverter to the motor is open.